Gilbarco Sk700 Programming Manual _top_ (2026)

A cold start is required for major reconfigurations or after replacing the CPU board: Open the CPU board cover. Toggle Switch: Move the switch to the CAL position. Jumper: Move the jumper to the Cold Start position. Power Up: The display will show a flashing E9 .

, focusing on basic setup, configuration codes, and troubleshooting procedures. 1. Preparing for Programming Gilbarco Sk700 Programming Manual

A "Cold Start" is required for major configuration changes, such as changing the Country Code Preparation: Power down the unit and move the CAL switch to the "CAL" position. A cold start is required for major reconfigurations

Identifies the hardware configuration (suction vs. pressure). Power Up: The display will show a flashing E9

Printer paper out (for dispensers with integrated receipts).

The is not a casual read; it is a technical reference for a machine built for industrial longevity. Unlike modern touchscreen dispensers, the SK700 requires you to manipulate binary switches, count LED blinks, and interpret error codes without a GUI.