Icom Ic-v88 Programming Software ((free)) Download Online

: Always perform a "Read" (Clone > Read) first to save a backup of the current factory settings. Edit Channels

| Problem | Likely Cause | Solution | |--------|--------------|----------| | “Radio not found” | Wrong COM port | Set correct COM port in software settings | | “Timeout” error | Radio not in clone mode | Turn radio OFF, click Read/Write, THEN turn radio ON | | USB driver not recognized | Missing FTDI/VCP driver | Download from FTDI chip website or Icom | | Software crashes on Windows 10/11 | Compatibility mode | Set .exe to run as Windows 7 + Admin | | Channels won’t save | Frequency out of range | IC-V88 Rx: 136–174 MHz, Tx: 146–174 MHz (varies by region) | icom ic-v88 programming software download

: CS-V88 is the dedicated programming utility provided by Icom. : Always perform a "Read" (Clone > Read)

| Error Message | Cause | Solution | |----------------|----------------|-------------| | “No response from transceiver” | Wrong COM port or bad cable | Check Device Manager; try a different USB port. | | “Communication timeout” | Radio off or low battery | Charge battery fully; turn radio on before “Read.” | | “Model mismatch” | Wrong software (e.g., IC-V86 vs V88) | Verify you have CS-V88, not CS-V86. | | “Access denied” in Windows | Permission issue | Run CS-V88 as Administrator (right-click > Run as admin). | | | “Communication timeout” | Radio off or