Resetter Printer Canon G2010 -

Print a nozzle check pattern. The error should be gone. If the error returns immediately, your waste ink pads are physically overflowing, and a resetter alone will not fix it.

or the Canon IJ Printer Assistant Tool for software-based maintenance. resetter printer canon g2010

To reset a Canon PIXMA G2010 printer, you generally need to address the waste ink absorber counter (indicated by error code . This can be done manually or via service software. 1. Enter Service Mode (Preparation) Before applying any reset, the printer must be in Service Mode . Follow these steps carefully: the printer but leave it plugged into the power source. Press and hold Stop/Reset button (red triangle icon). While holding the Stop button, press and hold Release the Stop button while still holding the Power button. Press the Stop button 5 times Print a nozzle check pattern

The printer will print a page showing the counter (D-value) is now D=000.0 . or the Canon IJ Printer Assistant Tool for

What or light sequence is your printer currently showing?

The is an invaluable tool that can extend the life of your printer by months or even years. When used correctly— after physically cleaning the waste ink pads—it saves you from expensive service center bills.